|
|
As far as the shape of the diffuser, a classic example is the P-51. The problem is getting a true scaled image of the setup.
Attached is a cleaned up version of an actual NA blueprint of the scoop/diffuser. I'm in the process of converting the digitized microfiche image to a CAD drawing. Even with the files, it's a matter of combining multiple drawings to get a true image. The attached does not detail the opening of the scoop which is slanted at about 45 degrees. That involves plotting from a different drawing to acquire that detail.
As you can see from the drawing the inlet is divided to service both the oil cooler and the radiator with separate exhausts. The inlet is only about 7 inches tall. The radiator consists of a engine cooler (395 sq in) and an intercooler (150 sq in). The core itself is 21 inches thick. Pretty massive. The slope appears to conform to the 7 degree rule right up to the point where it meets the radiator. No big changes in the walls. Very smooth transitions. Also, you can see the radiator does sit at a slight angle.
The idea is to draft the setup in AutoCAD and then scale the drawing to fit my application and start from there.
There are literally thousands of drawings to sort through but I'm starting to make sense of it.
T Mann
|
|