X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imr-da05.mx.aol.com ([205.188.105.147] verified) by logan.com (CommuniGate Pro SMTP 5.3.0) with ESMTP id 4051145 for flyrotary@lancaironline.net; Mon, 28 Dec 2009 19:50:27 -0500 Received-SPF: pass receiver=logan.com; client-ip=205.188.105.147; envelope-from=WRJJRS@aol.com Received: from imo-ma01.mx.aol.com (imo-ma01.mx.aol.com [64.12.78.136]) by imr-da05.mx.aol.com (8.14.1/8.14.1) with ESMTP id nBT0njFq005129 for ; Mon, 28 Dec 2009 19:49:45 -0500 Received: from WRJJRS@aol.com by imo-ma01.mx.aol.com (mail_out_v42.5.) id q.d4e.65ffb944 (37035) for ; Mon, 28 Dec 2009 19:49:41 -0500 (EST) Received: from smtprly-ma03.mx.aol.com (smtprly-ma03.mx.aol.com [64.12.207.142]) by cia-db02.mx.aol.com (v127.7) with ESMTP id MAILCIADB025-5c574b3952232b2; Mon, 28 Dec 2009 19:49:41 -0500 Received: from magic-m08.mail.aol.com (magic-m08.mail.aol.com [172.20.29.4]) by smtprly-ma03.mx.aol.com (v127.7) with ESMTP id MAILSMTPRLYMA035-5c574b3952232b2; Mon, 28 Dec 2009 19:49:39 -0500 From: wrjjrs@aol.com Message-ID: Date: Mon, 28 Dec 2009 19:49:39 EST Subject: Re: [FlyRotary] Renesis assembly To: flyrotary@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_d1a2.63e4ccb5.386aac23_boundary" X-Mailer: 9.0 SE for Windows sub 5046 X-AOL-ORIG-IP: 75.210.100.62 X-AOL-IP: 172.20.29.4 X-Spam-Flag:NO X-AOL-SENDER: WRJJRS@aol.com --part1_d1a2.63e4ccb5.386aac23_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit In a message dated 12/28/2009 3:35:52 PM Pacific Standard Time, lacombr@nbnet.nb.ca writes: Help, I cannot reassemble my Renesis. I tried twice and everytime rotor corner seal plugs fall out through a port when I turn the shaft after I torque the tension bolts. On the Renesis the corner seal plugs are metal and not rubber. If I cannot find how to assemble this engine I will have to buy a long block. Rino Lacombe Rino, heavy grease or super glue. And no I'm not kidding. Bill Jepson --part1_d1a2.63e4ccb5.386aac23_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable
In a message dated 12/28/2009 3:35:52 PM Pacific Standard Time,=20 lacombr@nbnet.nb.ca writes:
Help,
 
I cannot reassemble my Renesis. &n= bsp; I=20 tried twice and everytime rotor corner seal plugs fall out thr= ough a=20 port when I turn the shaft after I torque the tension bolts.  On th= e=20 Renesis the corner seal plugs are metal and not rubber.  If I canno= t find=20 how to assemble this engine I will have to buy a long block.
 
Rino Lacombe
Rino,
heavy grease or super glue. And no I'm not kidding.
Bill Jepson
--part1_d1a2.63e4ccb5.386aac23_boundary--