-------------- Original message from Jeff Whaley <jwhaley@datacast.com>: --------------

Here are the only photos available right now ... you can see the change in the cowl openings. Originally the RX7 cooler was sitting on top of the PSRU; at this location the PSRU plate behind the cooler was blocking too much of the exit air. So I first installed a Fluidyne oil cooler on left side of engine - this alone did not work, but with the second cooler installed around the spinner center and the reduced opening behind the spinner ... success! I can take some photos with the cowls off when I get home from business, if you wish to see them.

Jeff