On Sun, 30 Aug 2009 06:54:40 +1000
"George Lendich" <
lendich@aanet.com.au> wrote:
> Bob,
> Don't forget to add the 16X, it's a special I did for Ed.
> George
>
>
> > I've pretty much finalized my efforts at t-shirt design. The images
> > are at
http://bob-white.com/tshirt so take a look. These are all based
> > on George Lenich's design and the 2D versions are closest to what he is
> > doing for himself. If you want to download an image, be sure to click
> > on the "Full Resolution" link at the bottom of the photo to get the
> > best copy.
> >
> > I purchased a t-shirt from WalMart, and ordered one from
gyoshirt.com.
> > Gyoshirt is the Australian company George is working with. I like the
> > gyoshirt design application. They will let you put images on the front
> > and back. I've attached a couple of small pictures of the design I
> > submitted to them. Now for a word of warning. They don't communicate
> > very well. It took several days to get a response to ask about
> > shipping costs. I haven't heard anything about my order, and it went
> > in on the 19th. Total cost for the t-shirt with shipping to the us was
> > $35 AU, or $29.50 US (if I get it).
> >
> > I ordered the deluxe WalMart shirt with a base price of $16.22. Total
> > with shipping and sales tax was $23.72. They also sell a cheaper
> > shirt. The WalMart design only allows for a picture on the front of
> > the shirt. I had to upload 6 or 7 copies of the image before I could
> > get one that worked right. From what I could see on the web, it looked
> > like the image would come out too small, but in fact it was OK. The
> > wing spread was 13.5" on the finished product. Photo attached.
> >
> > I tried the hot transfer decals, and as I was told, they are quite
> > inferior. Plus, with my printer limitations, I can only get an image
> > 10.5" wide. Not worth the trouble.
> >
> > Finally, one or more of these images will be available on Cafe Press
> > web site depending on what Dwayne wants to do with them.
> >
> > Bob W.
> >
> > --
> > N93BD - Rotary Powered BD-4 -
http://www.bob-white.com
> > 3.8 Hours Total Time and holding
> > Cables for your rotary installation -
http://roblinstores.com/> >
>
>
> --------------------------------------------------------------------------------
>
>
> > --
> > Homepage:
http://www.flyrotary.com/> > Archive and UnSub:
> >
http://mail.lancaironline.net:81/lists/flyrotary/List.html
> >
>
--
N93BD - Rotary Powered BD-4 -
http://www.bob-white.com3.8 Hours Total Time and holding
Cables for your rotary installation -
http://roblinstores.com/
--
Homepage:
http://www.flyrotary.com/Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html