Received-SPF: none
 receiver=logan.com; client-ip=67.195.14.110; envelope-from=JLuckey@pacbell.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=pacbell.net;
  h=Received:X-Yahoo-SMTP:X-YMail-OSG:X-Yahoo-Newman-Property:From:To:Subject:Date:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:In-Reply-To:X-MimeOLE:Thread-Index;
  b=zDfF43lmWCCpeVbA6lld4284B64vEkisa2cLPw/X5/0AFdj34k2KgEO78mCga3dnP+L0cHbJUwO5kKHCWmD+pcXuzJFun+IDTkOCLdc2ymMYiyRIRVZbMhdmpAIvSoIs54aV/jutGURsBlWkcd1P4xJzEyYNiJK8I8bmxwt5z7g=  ;
From: "Jeff Luckey" <JLuckey@pacbell.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: WTF? Just when I think everything is going perfect...
Date: Tue, 21 Jul 2009 09:01:39 -0700
Message-ID: <002e01ca0a1c$8a343600$6601a8c0@dcshq1>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
In-Reply-To: <list-3766614@logan.com>
Thread-Index: AcoJtRBCDFNhaFjXTQSD/SINp7QTNQAZx11Q

I knew that... just couldn't remember (duh!), I think "my cup runneth over"
with TLA's (three letter acronyms)

Thanks for the reminder


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bob White
Sent: Monday, July 20, 2009 20:40
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: WTF? Just when I think everything is going
perfect...

On Mon, 20 Jul 2009 20:24:54 -0700
"Jeff Luckey" <JLuckey@pacbell.net> wrote:

> CAS?  = Crank Angle Sensor
> 
>  
> 
>   _____  
> 
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of David Leonard
> Sent: Monday, July 20, 2009 18:19
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: WTF? Just when I think everything is going
> perfect...
> 
>  
> 
> Yup, spins with no sign of firing at all!  It only spins easily by hand
when
> the plugs are out..  otherwise it is a one-compression-at-a-time kind of
> exercise.  Compression is normal..  I am well familiar with its feel.  
> 
> I am currently leaning toward a intermittent condition with my CAS wiring
or
> the bad gas/flooding issue.  At least it has made me think harder about my
> CAS as a single point failure and review the wiring.
> 
> Thanks for all the suggestions.
> 
> Dave Leonard
> 
> 
> 
> On Mon, Jul 20, 2009 at 11:59 AM, Charlie England
<ceengland@bellsouth.net>
> wrote:
> 
> David Leonard wrote:
> 
> Yesterday I went flying and tested out my new smoke system... everything
was
> perfect...  somke is fun.  Today I head out to go formation flying..
> nothing changed from my flight yesterday except for adding fuel.  But it
> won't start...   I verify that I have fuel pressure, fuel flow, injector
> function (in test mode), I have spark (in test mode).  Maybe it is
> flooded... I change the plugs, re-verify spark in cranking mode (to
> eliminate issues with CAS), re-drain the fuel, verify compression,
re-verify
> fuel pressure and flow and injector funcion... but still it just turns
over
> without starting...  Sigh
> 
> Anyone one know of a new component necessary other than fuel, spark, and
> compression?
> 


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html