|
Jeff,
I built a cog-belt redrive in the late 90's based loosely on the Finch design
but have never put it under power..........It was for a 12A to be installed in
a Cassutt Racer............Project was shelved in favor of my Dyke Delta and
a 13B...........When Tracy's redrives became the "Gold Standard" I did no
more development on my design..........I have photos on my old computer
which I have not downloaded to my current computer or I would post them
to the group............I would be interested in seeing the design you have if
you do not mind...........I also would pay any cost you may incur..........
Thanks,
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from Jeff Whaley <jwhaley@datacast.com>: --------------
Jarrett, George, Bernie:
I found the drawings … first, I’ll try scanning them to see what size the files are … if not too large I’ll email them to each of you.
Jeff
Jeff, that would be super. I insist on paying copy and mailing costs. Least I can do.Thank you so much! Bernie
Jeff,
I am also very interested in any PSRU design good or bad.
You never know what small piece of information you can glean from others ideas
George ( down under)
Thanks, no hurry what-so-ever, just would like to see them is all :)
Jarrett
|