Mailing List flyrotary@lancaironline.net Message #47162
From: Al Gietzen <ALVentures@cox.net>
Subject: Engine stall - float level
Date: Sat, 11 Jul 2009 22:29:23 -0800
To: 'Rotary motors in aircraft' <flyrotary@lancaironline.net>


Too high? Now that's a new one. Please explain.
Finn
------------------
Just recently my hangar neighbor was having trouble with his RV with, I
guess, a Lycoming - his engine would die on final approach.  This happened 2
- 3 times before he finally figured out the float in the carburetor had
leaked; and the fuel level in the bowl was too high.  It ran fine when he
started up cold, took off and was flying (probably running a bit rich).
When he pulled power on short final it would get too rich and die.

I recall a similar behavior with a car many, many years ago.

Maybe not relevant to your case; but seemed to fit.

Al G


Al Gietzen wrote:
> I sometimes would have the engine quit
> after pulling back on the power while crossing midfield coming in a full
> speed from the beach to land at Clearwater airpark
> -------------------------
> Did you ever check the carburetor float levels? Engine dying after pulling
> the power is a symptom of too high a float level.
>
> Just a thought,
>
> Al
>


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster