Received-SPF: pass
 receiver=logan.com; client-ip=207.115.11.52; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-3678369@logan.com>
In-Reply-To: <list-3678369@logan.com>
Subject: RE: [FlyRotary] Re: Injectors quandary.
Date: Mon, 15 Jun 2009 15:16:11 -0400
Message-ID: <90111B58BE064253A7B5AC757B842799@Desktop>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Thread-Index: Acnp/rx80F4dKup8Rv2ZUWp9JxleKgD7ih/Q

Chris,
I heard back from Steve Roth at Mistral today about the injectors to fit the
Mistral manifold.  He says they use the Mototron INJ-GAS-006 (L107)
Here is a drawing of the injector that you can use to check against your
manifold dimensions.

www.racetronix.com/images/injectors/L107.pdf

Good Luck!

Bill B

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Christopher Barber
Sent: Wednesday, June 10, 2009 3:07 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Injectors quandary.

Mistral has been no help in the past.  While I believe they have good
intent, they are, my guess is, very busy.  Past emails have gone unanswered
a number of times and no documentation was included.

We did buy it knowing there was NO support and that is what we have gotten
<g>

I think that avenue will not provide solutions.

All the best,

Chris
----- Original Message -----
From: "Jeff Whaley" <jwhaley@datacast.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, June 10, 2009 1:50 PM
Subject: [FlyRotary] Re: Injectors quandary.


Hey Chris, what does Mistral have to say?
They designed the intake; they must have a recommended injector.
That's where I'd start ... hopefully they can help.
Jeff
.html 


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html