Mailing List flyrotary@lancaironline.net Message #44521
From: Greg Ward <gregw@onestopdesign.biz>
Subject: Re: [FlyRotary] engine preservation
Date: Fri, 19 Dec 2008 17:54:18 -0800
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
I just read a great article on running ATF through the Rotary, supposedly to loosen up the apex seals, etc. (high detergent level).  Raves on about having done this multiple times in many engines, and supposedly power increases of up to 20% +.  Anybody done this?  Results?
Thanks;
Greg Ward
Lancair 20B N178RG in Progress
----- Original Message -----
Sent: Friday, December 19, 2008 5:35 PM
Subject: [FlyRotary] engine preservation

Lynn, thanks for the heads up on the engine.  Even though it is in a heated garage with hot water heat in the floor, I pulled the plugs and put oil in each rotor cavity and rolled it over 8 revolutions and duct taped the exhaust.  That should even oil the muffler bearings when I start it again.  JohnD
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster