|
Yes, #2 is coolant after rads, #3 is oil in the pan & I checked the settings in EM2 for cal. are correct from specs supplied by Tracy. Thanks, David R Cook
-------------- Original message --------------
From: "Bill Schertz" <wschertz@comcast.net>
Do you have a sensor hooked up to fluid temp 2&3?
Bill Schertz
KIS Cruiser #4045
N343BS
----- Original Message -----
Sent: Wednesday, October 01, 2008 9:45 AM
Subject: [FlyRotary] Re: Testing...one, two, three...
Been busy running eng./mapping fuel, what is NOP on Tracy's EM2 on fluid temp 2&3 ? Also have problem with temp readings for coolant & oil, showing 65400 degreas F. ? David R Cook RV6A Rotary, Michgan getting cold.
-------------- Original message --------------
From: "The Mallorys" <candtmallory@cebridge.net>
I’ve been busy building. My o-rings and seals from RWS got here yesterday, and today I finished painting the housings. Tomorrow I start reassembly.
Chris
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Mark Steitle
Sent: Tuesday, September 30, 2008 11:30 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Testing...one, two, three...
Receiving loud and clear... I guess everyone is busy either building or flying.
On Tue, Sep 30, 2008 at 10:45 AM, <DLOMHEIM@aol.com> wrote:
The list has gone silent (on my end) since 26 Sep, so just checking to make sure there wasn't a problem on my end, etc.
|