|
Thanks Greg, unfortunatly I reside in Canada, getting a motor shipped up here would probably cost as much as the engine did.. if I don't find anything closer I'll have to buy from down there.. we'll see how it goes..
Jarrett
> Hey Jarrett;
> Call 310-901-4805, ask for Brian. He is in Hawthorne, CA, and
> does JDM engines, including 20B's. He will put a 13B or whatever
> you want, onto a pallet, and ship it to you. I got my 20B from
> him complete, even with oil coolers, air conditioner, complete for
> $4500.00. I am sure a complete 13B or renesis is available, and
> pretty inexpensive. Tell him I sent you, you may have to try a
> few times to get him, but when you do, you'll be glad.
> Greg Ward
> Lancair 20B N178RG in progress
> ----- Original Message -----
> From: H & J Johnson
> To: Rotary motors in aircraft
> Sent: Wednesday, June 25, 2008 8:22 PM
> Subject: [FlyRotary] Re: Intake manifolds
>
>
>
>
>
> Bill, I'd been planning to start w/ a 13B and then extrapolate
> out to the 20B eventually. I think there is more of a market for
> the 13B. Don't send me a manifold... I might cut it up to see how
> it looks inside :) J/k.. for now I'll keep that offer on the
> back burner. What I REALLY need to find is a reasonably priced 13B
> short block [doesn't need to be running.. but complete is good]
> that isn't too far away from me.. for reasonable money.. anyway..
> I'll still looking but rotary engines aren't really popular at the
> wreckers.. [up my way anyway]..
>
>
>
> We'll see what happens..
>
> Jarrett
>
>
>
> > Jarrett,
> > Do you want 13B or 20B? I'll photograph the side of the 20B
> and
> > send you dimensions if you want. In fact I have a stock
> manifold
> > I'd send if you can send it back sometime.
> > Bill Jepson
> >
> >
> > -----Original Message-----
> > From: H & J Johnson <hjjohnson@sasktel.net>
> > To: Rotary motors in aircraft <flyrotary@lancaironline.net>
> > Sent: Tue, 24 Jun 2008 10:07 pm
> > Subject: [FlyRotary] Intake manifolds
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Guy's thanks for your help thus far! I've one more question,
> > anyone have dimensionaly accurate drawings or sketchs of the
> > intake manifold bolt up pattern and/or dimensions of the
> intake ports?
> >
> > Thanks again!
> >
> > Jarrett
> >
> > ?
> >
> >
> >
> > --
> >
> > Homepage: http://www.flyrotary.com/
> >
> > Archive and UnSub:
> > http://mail.lancaironline.net:81/lists/flyrotary/List.html
> >
>
>
> --
>
> Homepage: http://www.flyrotary.com/
>
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
|