Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Thu, 1 May 2008 11:24:58 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: PSRU
Message-Id: <20080501112458.8f1e3293.bob@bob-white.com>
In-Reply-To: <list-2880163@logan.com>
References: <list-2880163@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi Bill,

It could be a 3 rotor.  I really can't tell what's going on with the
rest of the intake and I can only see one exhaust tube because of the
heat shield.  Somehow it just doesn't look deep enough for a three
rotor.  Am I missing some detail that definitively makes it a three
rotor?

Bob W.


On Thu, 01 May 2008 12:28:41 -0400
wrjjrs@aol.com wrote:

> HEY BOB,
> Look again, that was '89 and all the exhausts were perpherial port. That's a 20B!
> PL mentioned on his site that he bets they blew up that small turbo, and I agree.
> Bil Jepson
> 
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Bob White <bob@bob-white.com>
> To: Rotary motors in aircraft <flyrotary@lancaironline.net>
> Sent: Wed, 30 Apr 2008 4:20 pm
> Subject: [FlyRotary] Re: PSRU
> 
> 
> 
> The PSRU is the same basic design, but it's not the same installation.
> One belt one rotor vs 2 belt 2 rotor.
> 
> Bob W.
> 
> 
> On Wed, 30 Apr 2008 19:18:45 -0400
> Jerry Hey <jerry@jerryhey.com> wrote:
> 
> > Here is another pic from Paul's list.  The engine/psru was built by  
> > Duncan Aviation in 1984.  The more I see the better  I like it.       
> > Quite an accomplishment for 1984.   Jerry
> > 
> > 
> > 
> 


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/