Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Tue, 12 Feb 2008 17:02:45 -0700
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] wire harness adaptor
Message-Id: <20080212170245.e793f028.bob@bob-white.com>
In-Reply-To: <list-2726830@logan.com>
References: <list-2726830@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi Bob,

The only way I can see getting the connector any tighter might be to
build a short extension without backshells, then plug into that.  I'm
not sure how bad of an idea that would be.  The first concern would be
reliability since there wouldn't be any protection for the wires if the
cable got pulled on.

Bob W.     


On Tue, 12 Feb 2008 15:27:25 -0500
bmears9413@aol.com wrote:

> 
> 
> 
> 
> 
> Bob White, or anyone with advise,
> 
> I would like to find an adaptor of some kind to get a lower profile on my EC2. I had the 90 degree end installed, but it still takes up over 2" of space. In my case it will hit the fuel tank. I can modify the tank if necessary. But if it was as simple as plugging a low profile adaptor, that would be the thing to do.
> 
> Bob Mears
> Supermarine Spitfire
> 
> 
> ________________________________________________________________________
> More new features than ever.  Check out the new AOL Mail ! - http://webmail.aol.com
> 


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/