Received-SPF: pass
 receiver=logan.com; client-ip=207.115.11.53; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-2720477@logan.com>
In-Reply-To: <list-2720477@logan.com>
Subject: Renesis Jet Air hookup
Date: Fri, 8 Feb 2008 10:32:57 -0500
Message-ID: <9DE8E13A09E54CBD934296ECBFDA3060@ARPTK8NG400>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: AchqFxF5XHyuBqjTRa6qHTgLJBRi8QAT5oTA

 Especially those of you who are flying with the Renesis engine, I would
like to know how you have handled the Jet Air inlet on the bottom of the
intake manifold.  It has two thin tubes that insert into the bottom of the
two Primary ports and it exits the bottom of the intake manifold with about
a 5/16 inch diameter tube.  In the original (Mazda) design, it allowed air
to enter the primary ports and help to break up fuel droplets.

I have a vacuum tube hooked up to it that goes to my fuel pressure
regulator.  
How did you handle yours and where did you get the fuel pressure regulator
vacuum?

Thanks,
Bill B