|
|
Anybody know where I can find a muffler compactor? I can tell I am
going to need one :>)
Bill B
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Mark Steitle
Sent: Saturday, January 05, 2008
9:25 PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Dennis'
Muffler
Bill,
Yes, the "auger muffler" is still hanging in there after 20 hrs of
ritualistic torture. It looks like it has what it takes to "take a
licking and keep on ticking". The only problem is that it isn't as
quite as I had hoped. So, I have decided to try a Hushpower II
resonator. And it WILL be inside the cowl. I will not hang a
muffler (even a pretty SS one) under the belly of my airplane. If you do
that to your Legacy I will have to rip it off and beat you with it.
Mark S.
(Where there's a will, there's a way.)
On Jan 5, 2008 2:34 PM, Bill Bradburry <bbradburry@bellsouth.net> wrote:
Thanks,
Mark.
Are you
going to hang it under the plane or try and install it inside the cowl?
How is your exhaust insert holding up? Has it blown out yet? I
assume that the largest inlet for the resonator is 2.5… I didn't see
anything larger. I suppose I will have to neck mine down, but that will
add to the length, so I may have to hang it under the plane.
Bill
B
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On Behalf Of Mark Steitle
Sent: Thursday, January 03, 2008
9:33 AM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Dennis'
Muffler
Bill,
I just ordered one. Got it off ebay. Here is the description...
2.50" HUSHPOWER II RESONATOR - FLOWMASTER 12512300
Mark S.
20.5 hrs
On Jan 3,
2008 8:06 AM, Bill Bradburry <bbradburry@bellsouth.net> wrote:
Did
anyone happen to get the part number of Dennis' muffler at Tracy's fly in? I seem to remember that
it was a resonator, not a muffler. I would like to see if I can find one
but have not found anything that looks like the one he has. My exhaust is
3" and his is 2 ½ , so I will either have to find a slightly larger size,
or neck my exhaust down to go through it.
Help
would be appreciated…my engine is LOUD!
Thanks,
Bill B
|
|