|
Doug,
Interesting use of part of the stock 13B intake......Any idea
what the 13B chamber weighs after cutting the top and bottom
off ??........
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from DLOMHEIM@aol.com: --------------
Here is a shot of the intake manifold I have cobbled together over the past few months. I have copied Ed's idea of using the telescoping tubing in an attempt to "tune" it once it's running. I have three bolt holes on the bottom of the manifold that will allow me "lock" it in place over a range of 1.5 inches or so. Won't know how well it works until I finally get around to running the engine (hopefully this Spring). I tried to make it as low a profile as possible but this is about as low as I can make it while using the stock Mazda DIE manifold so will have to cut a "bump" into the cowling top if I end up using this manifold.
Happy New Year and fly safe and 2008!
Doug Lomheim
RV-9A, FWF
OK City, OK
 
|