|
|
When making a straight tube, bell mouthed for the 20B what would
you all suggest as the ID for the pipe, I am thinking 1.46Inches. Would
that work for both primary and secondary pipes. That would give me 6
pipes 12 inches long. I also want to know where is the optimal place to put
the injectors for the three that are not in the block?
I see from the photos of Tracy’s 20B that the injectors
are as close to the block as possible.
Bob K
RV-10 90/90
Wiring the panel, doing the fiberglass and trying not to be in a
hurry.
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of kenpowell@comcast.net
Sent: Thursday, October 25, 2007 4:03 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: (*&^ Weather
How about stopping in and spending the nite when you make
your next trip to LA?
Ken Powell
Bryant, Arkansas
501-847-4721
-------------- Original message --------------
From: "Ed Anderson" <eanderson@carolina.rr.com>
Sorry, we
won't see you this time around, Ken. But AR is a bit out of the way
{:>)
-----
Original Message -----
Sent: Thursday, October
25, 2007 1:44 PM
Subject: [FlyRotary] Re:
(*&^ Weather
Why don't you make a detour thru Little Rock (actually
Bryant - SUZ) and pick me up on your way (just kidding). BTW, there will
be no flying out of here today due to rain and low ceilings.
Ken Powell
Bryant, Arkansas
501-847-4721
-------------- Original message --------------
From: "Ed Anderson" <eanderson@carolina.rr.com>
Well, I had
hoped to be at Shady Bend at the Rotary round up by this time. But, the
Wx has not cooperated. Don't get me wrong, we badly needed the rain, it
had not rain in 3 months - but, would have been nice if it could have picked
some other week out of the 3 months {:>).
20 miles to
the west its 10,000 foot ceilings, here its 700 foot, been that way all day
with the rain showers running a line almost straight South - North. Looks
like may have to wait until Saturday - boo-hoo.
Sorry guys,
just needing my rotary fix - certainly can't begrudge the rain.
|
|