|
|
Joe,
all spark plugs should fire as the engine was running at 3000 rpm. I had mine bunched up and grounded to the engine. You can see all of them firing. If you are doing this test with the plugs installed, keep the prop area clear, since the engine may fire and hurt somebody. My engine fired once like that.
Buly
On Oct 13, 2007, at 8:27 PM, Joe Ewen wrote:
I have been testing my engine harness wiring. When testing the ignition coils (Mode 8 engine not running, press store button), I am only getting a coil to fire on rotor 1. Rotors 2 and 3 are not firing. This is the same for both the Leading and Trailing coils. Is this how the EC2 normally works in test mode? or do I need to start rechecking the wiring harness.
Thanks,
Joe
|
|