|
Another thing to remember. The EC2 provides for the
fuel injection control as well as the ignition. Paul, you did
not state whether you also needed a EFI computer (could be using a carb or
Ellison Throttle body for example), but if you do want EFI then the EC2 provides
both injector and ignition control in one small inexpensive
package.
Ed
----- Original Message -----
Sent: Thursday, October 04, 2007 9:22
AM
Subject: [FlyRotary] Re: Looking for an
EC2
Lynn, Thank you for the reply and idea. I know very
little about electronic ignition and there seems to be many ways of building a
DIS.
I leaning towards the RWS EC2 and six LS1 coils as it's been done
on the Corvair engine and I already have the coils. I wanted an
individual coil per cylinder to limit the loss to a single cylinder in
the event of a coil failure.
Thanks again
Paul
Lehanover@aol.com wrote:
I
need to convert the Corvair engine to a Distributorless Ignition
System (DIS) and need an RWS EC2.
Or, a single reluctor on the front pulley, three Chrysler pickups,
three Chrysler amplifiers and three double ended coils.
Lynn E. Hanover
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|