|
|
Thanks Al, Ed, Bob, Bill, George and Chris for your replies and insight.
My plane is a SP4000 made by Australian Lightwing, similar to a RV10
just less rivets as it has a steel frame, composite skin and aluminium
wings which are all supplied built, just have to bolt together, add an
engine & bits to get to that 90% done 90% to go stage.
I've found a 4 port Renesis to play with, I notice Tracy uses one of
these so I'm guessing they are nearly equivalent to the 6 port in
aircraft use. Its missing the intake manifold so those 2 injectors need
replacing, is it possible to use any injectors or is it best to have a
matched set.
The 20b will lose its re-drive but stay in the shed ready to install,
just in case I need more weight on the nose :)
Regards
Andrew Martin
Andrew,
You can always add weight, you could move the engine forward and have a slightly longer nose, this could also reduce your flat plate drag area. The extra room could be used for duel batteries and any manner of accessories etc.
I would not worry about not having enough weight at this point in time.
George (down under)
|
|