|
I have a fine wire mesh filter in an aluminum housing with
An-6 fittings on each end just before the fuel enters my header tank.. You
can unscrew one end to clean the mesh. However, been too long ago and I
find I never logged the part number on my fuel data sheet.
But, here are the specific part numbers I use for the EFI
filters
Fuel Filters: OEM Auto Fuel Injector Fuel Filters (Two in
Parallel)
Type: AC GF - 481 Pkg: 25056052 OEM:25055129 (or equivalent)
Fittings: 3/8 Saginaw to AN6 Adapter, "O" ring required
Ed
----- Original Message -----
Sent: Saturday, September 08, 2007 10:18
PM
Subject: [FlyRotary] Re: need help
Thanks Rob and Ed for the replys on the MSD
fuel pumps.
Now; what kind of filter do you have ahead of
the pump? I'm thinking of using some fine mesh screen to make a filter
inside the sump tank. It will be hard to service but believe that one
will prolong pump life and possibly. stop a particle that could interupt
fuel flow. What size mesh is recommended?
Wendell
I have been using the MSD 2225 for about 20
hour with no problem so far. Plenty of fuel pressure. Only problem is that
it is not threaded so I had to use the barbed nipples that come with the
pump. How bad can that be?
Robert Bollinger
FM1099 MUM
Fairfield IA
52557
(641)472-7000 ex2068
(641)919-3213 cell
rob@mum.edu
|