Phil;

You can check out my installation at
http://members.cox.net/alg3/airplane.htm ; follow link to engine, dyno test,
etc.

I have a custom oil cooler made by Griffin; a very robust and well built
unit.  The face area and volume are similar to Mark's; but the configuration
is quite different for my installation in the wing root.  Based on the data
that I have, the cooler is quite adequate; the issue in my case is the
somewhat marginal air flow due to location and installation constraints.

Al


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Phil White
Sent: Wednesday, September 05, 2007 6:00 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] another 20B under construction

I was on vacation while last week's flurry of emails flew regarding 20B
planes not yet flying.  I have a 20B awaiting re-assembly and mounting
on my RV-10.  Airframe is 97% done, but panel not started.

    Would appreciate photos or details of cooling systems (esp. which
Oil cooler you used successfully) from other 20B installations.

Phil White in Downers Grove, IL

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html