Received-SPF: none
 receiver=logan.com; client-ip=68.230.241.45; envelope-from=alventures@cox.net
From: "Al Gietzen" <ALVentures@cox.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] another 20B under construction
Date: Thu, 6 Sep 2007 08:06:36 -0800
Message-ID: <002101c7f09f$e74f03d0$6400a8c0@BigAl>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Importance: Normal
In-Reply-To: <list-2314099@logan.com>

Phil;

You can check out my installation at
http://members.cox.net/alg3/airplane.htm ; follow link to engine, dyno =
test,
etc.

I have a custom oil cooler made by Griffin; a very robust and well built
unit.  The face area and volume are similar to Mark's; but the =
configuration
is quite different for my installation in the wing root.  Based on the =
data
that I have, the cooler is quite adequate; the issue in my case is the
somewhat marginal air flow due to location and installation constraints.

Al


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Phil White
Sent: Wednesday, September 05, 2007 6:00 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] another 20B under construction

I was on vacation while last week's flurry of emails flew regarding 20B=20
planes not yet flying.  I have a 20B awaiting re-assembly and mounting=20
on my RV-10.  Airframe is 97% done, but panel not started.

    Would appreciate photos or details of cooling systems (esp. which=20
Oil cooler you used successfully) from other 20B installations.

Phil White in Downers Grove, IL

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html