Received-SPF: pass
 receiver=logan.com; client-ip=205.188.144.207; envelope-from=WRJJRS@aol.com
References: <list-2187708@logan.com>
To: flyrotary@lancaironline.net
Content-Transfer-Encoding: quoted-printable
Subject: Re: [FlyRotary] Carbs
Date: Thu, 19 Jul 2007 15:44:58 -0400
In-Reply-To: <list-2187708@logan.com>
MIME-Version: 1.0
From: wrjjrs@aol.com
Content-Type: text/plain; charset="iso-8859-1"; format=flowed
Message-Id: <8C998546C3619CF-15B4-963D@webmail-md13.sysops.aol.com>

Richard,
You should seriously consider a clear float bowl. On engines capable of=20
pulling high vacuum WOT often will drain the float bowl if you don't=20
run a fuel pump. The resultant lean condition isn't good for your=20
engine!
Bill Jepson


-----Original Message-----
From: Richard Sohn <unicorn@gdsys.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Thu, 19 Jul 2007 12:16 pm
Subject: [FlyRotary] Carbs


Hi Lynn,

=A0

I am running my 12A single with gear box and Prop now.

The carb is a 36mm Mikuni. It does flow 5gph fuel at 5000rpm. Havent=20
done any tuning so far. The reason for using this carb is, I had it. I=20
did run WOT the other day, and at around 5500rpm, the mixture went=20
totally out of wack, lean. Already installed a bigger main jet, no run=20
yet.

I could probabely use your info about a flow bench somewhere down the=20
road.

=A0

Thanks

=A0

Richard.

=A0

=A0

=A0


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free=20
from AOL at AOL.com.
=3D0