Or, if you don't want to go through the trouble, you can get one from Pegasus Auto Racing at http://www.pegasusautoracing.com/pdfs/063.pdf.  By the time you buy the filler neck, bungs, aluminum, welding rod, etc. you can buy one for a little more.  The tank dimensions are 4.63 x 5.73.  It holds 1-1/4 quart.  Tank comes with mounting flanges, two bungs, and a billet filler neck. -- Mark S.



 At 12:46 AM 10/14/2003 -0700, you wrote:

Here is a pic of my coolant header tank. It is a small volume but it is located above the engine but low enough to not interfere with the cowl. It has a 21psi cap. When building an aluminium tank you have to order a filler neck as they are not readily available (unless you have a lathe?). I got mine from C&R racing.

S. Todd Bartrim
Turbo 13B RV-9Endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm

   "Whatever you vividly imagine, Ardently desire, Sincerely believe in, Enthusiastically act upon, Must inevitably come to pass".
 

>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html