X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imo-d03.mx.aol.com ([205.188.157.35] verified) by logan.com (CommuniGate Pro SMTP 5.1.10) with ESMTP id 2148709 for flyrotary@lancaironline.net; Fri, 29 Jun 2007 19:03:44 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.188.157.35; envelope-from=BMears9413@aol.com Received: from BMears9413@aol.com by imo-d03.mx.aol.com (mail_out_v38_r9.2.) id q.c24.1b57def2 (52839) for ; Fri, 29 Jun 2007 19:03:03 -0400 (EDT) Received: from mblk-d13 (mblk-d13.mblk.aol.com [205.188.149.5]) by cia-m02.mx.aol.com (v117.7) with ESMTP id MAILCIAM027-ce6746858fa71fb; Fri, 29 Jun 2007 19:03:03 -0400 References: To: flyrotary@lancaironline.net Subject: Re: [FlyRotary] Re: PP construction methods Date: Fri, 29 Jun 2007 19:03:02 -0400 In-Reply-To: X-MB-Message-Source: WebUI MIME-Version: 1.0 From: bmears9413@aol.com X-MB-Message-Type: User Content-Type: multipart/alternative; boundary="--------MB_8C988B8C7CB5904_2C0_1145D_mblk-d13.sysops.aol.com" X-Mailer: AOL WebMail 28363 Received: from 65.182.71.8 by mblk-d13.sysops.aol.com (205.188.149.5) with HTTP (WebMailUI); Fri, 29 Jun 2007 19:03:02 -0400 Message-Id: <8C988B8C7CB5904-2C0-887A@mblk-d13.sysops.aol.com> X-AOL-IP: 205.188.149.5 X-Spam-Flag: NO ----------MB_8C988B8C7CB5904_2C0_1145D_mblk-d13.sysops.aol.com Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" My ports were 1" dia. if I recall right. Done on a 12A. I had a buddy back t= hen that worked for Kenworth and he got me some diesel injector sleeves. Eve= n had a tool that would "swell" the sleeve after it was in place. Then I jus= t filled the entire water chamber in epoxy. I still had the old manifold so=20= I took a pic. Thought I would throw in a pic of the new manifold for my 20B.= Slightly different huh! Bob Mears Supermarine Spitfire View full size View full size -----Original Message----- From: Kelly Troyer To: Rotary motors in aircraft Sent: Fri, 29 Jun 2007 4:23 pm Subject: [FlyRotary] Re: PP construction methods Bob, =C2=A0 Do you recall the I.D. of the injection tubes you used and were you=20 running a 12a or 13B ?? -- Kelly Troyer=20 "Dyke Delta"_13B ROTARY Engine=20 "RWS"_RD1C/EC2/EM2=20 "Mistral"_Backplate/Oil Manifold=20 -------------- Original message from bmears9413@aol.com: --------------=20 I built P Ports by just drilling a hole through the housing, squeeezingin a=20= diesel injection=C3=82 tube, and epoxy fill the entire water chamber it is d= rilled through. ran that little motor on the street for years and it never l= eaked. =C3=82=20 Bob Mears Supermarine spitfire -----Original Message----- From: Richard Sohn=20 To: Rotary motors in aircraft=20 Sent: Wed, 20 Jun 2007 8:54 am Subject: [FlyRotary] Re: PP construction methods =C3=82=20 ----- Original Message -----=20 From: Russell Duffy=20 To: Rotary motors in aircraft=20 Sent: Wednesday, June 20, 2007 7:19 AM Subject: [FlyRotary] PP construction methods Greetings, =C3=82=20 One of the things that's always bothered me about making a PP housing is lea= kage.=C3=82 I've heard very experienced folks say that eventually, any PP ho= using you make will leak, and it's easy for me to imagine=C3=82 that happeni= ng.=C3=82 I don't think I've heard the same thing about factory housings tho= ugh.=C3=82 How are the ports installed in the factory PP housing?=C3=82=20 =C3=82=20 The other problem with a conversion is the side ports.=C3=82 I know people f= ill these with their favorite epoxy, but I'd worry about that coming loose,=20= and getting into the rotor.=C3=82 How much=C3=82 would it hurt the PP operat= ion if you just sealed the ports on the outside of the side housings with a=20= plate where the intake would have been?=C3=82 =C3=82=20 =C3=82=20 Cheers, Rusty =C3=82=20 Rusty, =C3=82=20 I have run my PP on the single rotor for about 25hrs throug all sorts of hea= t cycles and never had a problem with leaking. Keep in mind that my insert i= s held in place by a flange with two bolts, so the JB only seals, it does no= t do the holding.=20 I certainly would never want to depend on JB for holding the insert in place= . =C3=82=20 On your question with the open side port, one of the side ports was open dur= ing the same test period, closed on the outside. Never observed any negative= effect, however, it never ran max RPM. The highest was 5000RPM. I have clos= ed that port now for the next test runs. =C3=82=20 FWIW. =C3=82=20 =C3=82=20 =C3=82=20 =C3=82=20 =C3=82=20 No virus found in this incoming message. Checked by AVG Free Edition.=20 Version: 7.5.472 / Virus Database: 269.9.1/854 - Release Date: 6/19/2007 1:1= 2 PM AOL now offers free email to everyone. Find out more about what's free from=20= AOL at AOL.com. ________________________________________________________________________ AOL now offers free email to everyone. Find out more about what's free from= AOL at AOL.com. ----------MB_8C988B8C7CB5904_2C0_1145D_mblk-d13.sysops.aol.com Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="utf-8"
My ports were 1" di= a. if I recall right. Done on a 12A. I had a buddy back then that worked for= Kenworth and he got me some diesel injector sleeves. Even had a tool that w= ould "swell" the sleeve after it was in place. Then I just filled the entire= water chamber in epoxy. I still had the old manifold so I took a pic. Thoug= ht I would throw in a pic of the new manifold for my 20B. Slightly different= huh!

Bob Mears
Supermarine Spitfire

View full size
View full size



-----Original Message-----
From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Fri, 29 Jun 2007 4:23 pm
Subject: [FlyRotary] Re: PP construction methods

Bob,
  Do you recall the I.D. of the injection tubes you used and were=20= you
running a 12a or 13B ??
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold




-------------- Original message from bmears9413@aol.com: --------------

I built P Ports by just drilling a hole through the housing, squeeezing= in a diesel injection=C3=82 tube, and epoxy fill the entire water chamber it= is drilled through. ran that little motor on the street for years and it ne= ver leaked.
=C3=82
Bob Mears
Supermarine spitfire


-----Original Message-----
From: Richard Sohn
To: Rotary motors in aircraft
Sent: Wed, 20 Jun 2007 8:54 am
Subject: [FlyRotary] Re: PP construction methods

=C3=82
----- Original Message -----
Sent: Wednesday, June 20, 2007 7:19 A= M
Subject: [FlyRotary] PP construction=20= methods

Greetings,
=C3= =82
One of the things t= hat's always bothered me about making a PP housing is leakage.=C3=82 I've he= ard very experienced folks say that eventually, any PP housing you make will= leak, and it's easy for me to imagine=C3=82 that happening.=C3=82 I don't t= hink I've heard the same thing about factory housings though.=C3=82 <= /SPAN>How are the ports=20= installed in the factory PP housing?=C3=82
=C3= =82
The other problem w= ith a conversion is the side ports.=C3=82 I know people fill these with thei= r favorite epoxy, but I'd worry about that coming loose, and getting into th= e rotor.=C3=82 How much=C3=82 would it hurt the PP operation if you just sea= led the ports on the outside of the side housings with a plate where the int= ake would have been?=C3=82 =C3=82
=C3=82
Cheers,
Rusty=
=C3=82
Rusty,
=C3=82
I have run my PP on the single rotor for about 25hrs= throug all sorts of heat cycles and never had a problem with leaking. Keep=20= in mind that my insert is held in place by a flange with two bolts, so the J= B only seals, it does not do the holding.
I certainly would never want to depend on JB for hol= ding the insert in place.
=C3=82
On your question with the open side port, one of the= side ports was open during the same test period, closed on the outside. Nev= er observed any negative effect, however, it never ran max RPM. The highest=20= was 5000RPM. I have closed that port now for the next test runs.
=C3=82
FWIW.
=C3=82
=C3=82
=C3=82
=C3=82
=C3=82
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.472 / Virus Database: 269.9.1/854 - Release Date: 6/19/2007 1:1= 2 PM
AOL now offers free email to everyone. Find out more about what's free from=20= AOL at AOL.com.
----------MB_8C988B8C7CB5904_2C0_1145D_mblk-d13.sysops.aol.com--