|
|
Hi Buly,
I think this is really good news. Much better to have a reason for the
problem and in this case, it cropped up at a very good time (NOT
flying).
Sorry for the late reply, but I'm trying to get thru 230 Flyrotary
messages waiting for me after a 10 day vacation. I've read about 200
of them and have 85 to go. They just keep coming in. :)
Bob W.
On Fri, 22 Jun 2007 17:51:39 -0400
Bulent Aliev <atlasyts@bellsouth.net> wrote:
> Thanks Tracy. I sent it because had a feeling that there could be a
> problem also. It was modified since the canopy was pushing down on
> the connector.
> Buly
>
>
> On Jun 22, 2007, at 10:38 AM, Tracy crook wrote:
>
> >
> > Buly,
> > I was preparing to ship your EC2 & EM2 back after repairs when I
> > noticed the EC2 control panel in the bottom of the box you sent.
> > I normally don't need this when repairing EC2s but yours turned out
> > to be an exception. I noticed what I thought to be more shipping
> > damage. The connector was bent down at a considerable angle. On
> > closer observation it was apparent that this was an intentional
> > modification as the solder connections had been reheated and the
> > connector solder pins bent down while pulling them out of the
> > board. The solder connections had been re-soldered. During this
> > process a couple of the connections were broken. This caused
> > several of the programming modes to be disabled and even worse, the
> > Mode selected on the thumbwheel switch was not always what was
> > actually being programmed. To say the least, this is a formula
> > for disaster.
> >
> > Don't do this to my babies! If it won't fit in the location you
> > are trying to fit it in, find another location or modify the
> > location, NOT THE EC2!
> >
> > I'll try to get this fixed before leaving next Tuesday but it'll be
> > close. No promises though.
> >
> > Tracy
> >
> >
> >
> > --
> > Homepage: http://www.flyrotary.com/
> > Archive and UnSub: http://mail.lancaironline.net:81/lists/
> > flyrotary/List.html
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/
|
|