|
|
> Do you have a photo of the cover plate / adapter block? I
> did a quick
> scan
> of your website, and didn't see one. What size fitting is
> required for the
> return? (I *have* a mill.)
>
> Dale R.
Hi Dale;
Attached is a photo of my adapter block. I can't find a more recent photo
of it, but it has been altered a little from this pic. The hose nipps in
this pic are 1" but I cut them off and replaced them with 1.25". The outlet
now comes straight out as it enters a small coolant header tank located on
the FW above the engine. (pic attached on next email) This works very well
and provides an excellent return point for the turbo coolant and heater
return. I've also welded closed the threaded hole that is marked fro turbo
coolant return.
S. Todd Bartrim
Turbo 13B RV-9Endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm
"Whatever you vividly imagine, Ardently desire, Sincerely believe in,
Enthusiastically act upon, Must inevitably come to pass".
|
|