----- Original Message -----
Sent: Tuesday, June 05, 2007 12:22
PM
Subject: [FlyRotary] Re: Rotorcase
vents
Yes, John, I use some 3/8" dia(I think that's diameter
but you may want to measure) rubber fuel hose and bring the side vent up
to the main vent (I may have used a "T" - can't recall and won't be going out
to airport until later this week -will check then) and then to a hose
that I at one time had going to my oil/air separator. After flying with
for 2 years and never finding any oil in the it, I took the air/oil
separator off. The hose now just trails out the bottom of my
cowl.
Ed
----- Original Message -----
Sent: Tuesday, June 05, 2007 11:20
AM
Subject: [FlyRotary] Rotorcase
vents
Ed, there are two case vents, one from the
center section and one on the oil filler tube, do you run these into a
larger tube and out the tunnel in standard aircraft engine
configuration. JohnD