|
Yes, John, I use some 3/8" dia(I think that's diameter but
you may want to measure) rubber fuel hose and bring the side vent up to
the main vent (I may have used a "T" - can't recall and won't be going out to
airport until later this week -will check then) and then to a hose that I
at one time had going to my oil/air separator. After flying with for 2
years and never finding any oil in the it, I took the air/oil separator
off. The hose now just trails out the bottom of my cowl.
Ed
----- Original Message -----
Sent: Tuesday, June 05, 2007 11:20
AM
Subject: [FlyRotary] Rotorcase
vents
Ed, there are two case vents, one from the center
section and one on the oil filler tube, do you run these into a larger tube
and out the tunnel in standard aircraft engine configuration.
JohnD
|