Hi Joe,

Thanks for the reference, but so far I only have the square
connectors.  John needs the oval ones.  So far I haven't found a source
for the oval connector only.  Just for the record, the EFI connectors I
stock are MSD-2400's which are widely available, usually in a pack of 8.

Bob W.

On Fri, 23 Mar 2007 10:14:45 -0400 (EDT)
jewen@comporium.net wrote:

> Hi John,
> Not sure if the connector you are refering to are correct, but you may
> want to try http://www.roblin-photo.com/shop/.  This is Bob Whites site,
> he sells the bare connector and pins for $2.50 each.  Better price and you
> can run your Tefzel all the way to the connector, eliminating splices.
> You may want to check with Bob to confirm fit.
> Joe
>
>
> On Fri, March 23, 2007 9:04 am, John Downing wrote:
> > Are the injector connectors, Nippon Denso, that fit the Toyota - Nissan,
> > the ones that will work on the 89, 91 Mazda injectors with the oval
> > connector?  The site showing the connectors is
> > www.fiveomotorsport.com/injector  CONNECT.asp  Thankyou  JohnD
>
>
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
First Flight:  11/23/2006 7:50AM - 3.8 Hours Total Time
Cables for your rotary installation - http://www.roblinphoto.com/shop/