|
Message
And now for another wacky
question... I read in the archives that the Renesis runs the stock
oil level one inch above the bottom of the engine.
While it's probably not
ideal, would it hurt anything if I ran the oil level in the single rotor (13B
REW parts) above the bottom of the engine a bit? I know there would be some power
loss, and frothing from the chain being in the oil, but other than that, is it a
significant problem?
This all goes along with my
poor man's dry sump system. It would be a way to make sure the drain
line stays submerged, and to supplement the 2.5 quart capacity of the oil/water
cooler I'm using.
Thanks,
Rusty (awesome job on the
fuel computer Ed!!!)
|