Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.73; envelope-from=atlasyts@bellsouth.net
Mime-Version: 1.0 (Apple Message framework v752.2)
In-Reply-To: <list-1810946@logan.com>
References: <list-1810946@logan.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Message-Id: <DD290368-76C7-4931-BB09-7BCF14A4EF17@bellsouth.net>
Content-Transfer-Encoding: 7bit
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] Re: wire routing
Date: Sun, 4 Feb 2007 16:30:55 -0500
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>

That's what I told the guy that suggested it, but he insisted that it  
should be between the two wires?
The noise was more like a static. Also when the ATC transmitted the  
noise stopped and the reception was clear. But looks like my  
transmissions to ATC were noisy?
Buly
On Feb 4, 2007, at 3:19 PM, Bob White wrote:

> Hi Buly,
>
> If the capacitor doesn't help across the wires, you might try  
> putting a
> capacitor from each wire to ground.  What kind of noise was it?  Hum,
> tone, static ????.
>
> Bob W. (I have to adjust my prop with a wrench.)
>
>
>
> On Sun, 4 Feb 2007 14:53:00 -0500
> Bulent Aliev <atlasyts@bellsouth.net> wrote:
>
>> Since you guys are on the electric noise page:
>> The other day I went for another short flight over the beach and  
>> again I
>> had a persistent study noise in my headset after takeoff. On the
>> ground with engine running it was fine.
>> It stopped for a moment when I pushed on the prop pitch adjustment
>> switch on the Ivo prop, than started again. I checked the brushes on
>> the prop and they are fine. it was suggested that the two floating
>> wires from the reversible prop switch to the brushes act as an
>> antenna. When I use the switch they get grounded? Installed a small
>> capacitor between the two wires, but had no chance to fly it again.
>> We are under a huge TFR for the Big Game. Did not have this problem
>> before. Maybe someone else had the same experience?
>> Thanks.
>> Buly
>> CZ MK-IV
>>
>>
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>
>
> -- 
> N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> First Flight:  11/23/2006 7:50AM - 1.7 Hours Total Time
> Cables for your rotary installation - http://www.roblinphoto.com/shop/
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/