In a message dated 1/31/2007 8:46:18 A.M. Eastern Standard Time,
downing.j@sbcglobal.net writes:
I have a question on routing the wires to the
injectors. The aircraft is a Wittmann Tailwind (tube and fabric) with
the fuel tank behind the panel. The most convenient routing for the
wires would be over the fuel tank and thru the top of the firewall. Will
this positioning of the injector wires have an effect on the magnetic compass
which already is seeing a condition. JohnD
Lest north be always where the nose is pointed, and if you must run
wires over the tank,
run them through a length of aluminum tubing which will not pass a
flux field.
Lynn E. Hanover