In a message dated 1/23/2007 4:34:50 PM Pacific Standard Time, atlasyts@bellsouth.net writes:
I started putting together a spray system for the radiator cooling.
Tested everything on the bench and worked very well. The ketch is
that my radiator is mounted in the lowest point of the engine room.
When the little windshield wash pump stops, the spray nozzle keeps
dripping since the lines are primed.
Unless I find or make a syphon brake, I may have to find a pump that
will brake the flow when stopped. Any ideas or suggestions?
Buly
They do have some ball style check valves for some of the spray systems Buly.
A low pressure one (like 1psi) would do the trick.
Bill Jepson