Great to see your BD4 join the rotary powered fleet Bob. Button is on
the way.
Two new O.R.B.S. members in a week! Proof that all those
hours & years of planning & work do pay off.
Tracy (trying to figure out how to convert Excel chart into a JPEG
file)
----- Original Message -----
Sent: Thursday, November 23, 2006 1:17
PM
Subject: [FlyRotary] N93BD BD-4 First
Flight
I finally got my plane in the air, lifting off at 7:50AM this
morning.
OAT was about 40F. Flew for about 20 minutes, did one stall
and landed
to check everything.
I bobbled around a bit on take off
getting used to the control feel.
Landing was uneventful.
I will
need to do some work on cooling as I expected. The oil
cooler
location is poor with not enough room behind it and oil temps
are
running about 10-15 deg warmer than the water. Both are too high
for
summer time flying. Max oil temp was about 220F, so it was higher
than
I wanted to see. I also want to recheck the calibration on the
sensors
just to make sure I didn't mess that up.
Another rotary is
now flying at least a little. Send me one of those
buttons Tracy!
:)
Bob White
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
First
Flight: 11/23/2006 7:50AM
Cables for your rotary installation - http://www.roblinphoto.com/shop/
--
Homepage:
http://www.flyrotary.com/
Archive and
UnSub: http://mail.lancaironline.net/lists/flyrotary/