|
.
>
> That's what I usually do. Just
turn the master ON (everything else
> off) while holding down the
program button. But I'm not sure if there
> is a sneak power to the
injectors? I'll check that.
So long as there is no power
to your injectors before you turn your Master on, then you should be
OK.
>
> My probes are 2" away from the ports and
protrude about 1" in to the
> middle of the exhaust pipes.
>
Regarding your
EGT
My probes are 8" away from the ports
and I see 1650F at WOT
So seeing how close your EGT probes
are I would say 1750F is reasonable.
Ed
|