Received-SPF: none
 receiver=logan.com; client-ip=206.190.48.227; envelope-from=squiggles@yahoo.com
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=yahoo.com;
  h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding;
  b=3Zj3qu2ZQlCaUdKqvmmDYgT3iyEoR6UNXRPtN1360zgq0CvDAYlaJC8CV13gXVQX0gDSrAYzgf1kTCL6uTw2xgjIFIYhav/utGgJ0Zo97kAsHYTmAIB6BwaAjKBHQULsZJrGKHZfN+psA4CQAqE1MREcXi/EUxV8IAE9xzXPKZM=  ;
Message-ID: <20061014002751.3182.qmail@web52704.mail.yahoo.com>
Date: Fri, 13 Oct 2006 17:27:51 -0700 (PDT)
From: Scott <squiggles@yahoo.com>
Subject: Ford Thermostat Housing / Water Neck
To: flyrotary@lancaironline.net
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

I had made notes from someone who had posted about
using a ford 351 clevland thermostat housing / water
neck to bolt up to the stock gen 2 water pump. 
However, I searches of flyrotary are not yielding
results prior to 2005.

I purchased the neck and elongated the mount holes to
get a perfect fit per the original posters suggestion.
 However, I purchased the neck with a bung on the top,
but I don't know what size plug to put in the bung.  

http://store.summitracing.com/partdetail.asp?part=FMS%2DM%2D8592%2DA429&view=1&N=700+150
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=1435

I have tried a 3/8" NPT fitting, but as soon as the
threads engage it binds.

I would like to avoid going to Lowes hardware tomorrow
and getting a sampling of bolts around 3/8" in size to
find out what fits it.

Any help is appreciated...

Thx...
-Scott


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com