Project status report
I recently modified my intake manifold. I added 10 inches of runner and
velocity stacks. The other project was increasing the opening to my radiator. I
increased the opening approx. six square inches. I also advanced the timing 3
"clicks".
I was able to test Thursday afternoon. Outside air temp was 94 degrees.
Full power climb to 2000 msl and water temp was below 200 degrees. Reduced
power to 5600rpm and water slowly come down to 185 degrees. Climbed to 8000'
and did a couple of speed runs. I was able to turn the engine at 6700 rpm and
that gave me 165 KTAS (Dynon). I was only able to do two runs. The numbers were
consistent on both runs. My gps was showing 180kts ground speed on the second.
I forgot to look on the first. Going out this afternoon so I will keep
ya'll posted.
Jason Hutchison