Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.66; envelope-from=atlasyts@bellsouth.net
Mime-Version: 1.0 (Apple Message framework v752.2)
In-Reply-To: <list-1405843@logan.com>
References: <list-1405843@logan.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Message-Id: <0FC0E9A6-E2A7-49A6-BEE2-DADD111176A3@bellsouth.net>
Content-Transfer-Encoding: 7bit
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] Re: [FlyRotary]Update on my project
Date: Sat, 16 Sep 2006 09:09:25 -0400
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>

Jason, what rpm are you getting on takeoff?
Bulent "Buly" Aliev
FXE Ft lauderdale, FL
http://tinyurl.com/s5xw8

On Sep 16, 2006, at 9:00 AM, Hutchison, Jason wrote:

>
>
>
>
> Project status report
>
>
>
> I recently modified my intake manifold. I added 10 inches of runner  
> and velocity stacks. The other project was increasing the opening  
> to my radiator. I increased the opening approx. six square inches.  
> I also advanced the timing 3 "clicks".
>
>
>
> I was able to test Thursday afternoon. Outside air temp was 94  
> degrees. Full power climb to 2000 msl and water temp was below 200  
> degrees. Reduced power to 5600rpm and water slowly come down to 185  
> degrees. Climbed to 8000' and did a couple of speed runs. I was  
> able to turn the engine at 6700 rpm and that gave me 165 KTAS  
> (Dynon). I was only able to do two runs. The numbers were  
> consistent on both runs. My gps was showing 180kts ground speed on  
> the second. I forgot to look on the first.  Going out this  
> afternoon so I will keep ya'll posted.
>
>
>
> Jason Hutchison
>
>