Received-SPF: none
 receiver=logan.com; client-ip=206.18.177.53; envelope-from=rlwhite@comcast.net
Date: Sun, 3 Sep 2006 13:51:13 -0600
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] GM Coils & plug wires
Message-Id: <20060903135113.5931208a.rlwhite@comcast.net>
In-Reply-To: <list-1362219@logan.com>
References: <list-1362219@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi Ben,

Tracy has plug wires listed in his catalog at
http://rotaryaviation.com/plug_wires.htm, but it still says comming
soon so you would need to check with him on availability.

Also, you can order plug wires to the length you need from Magnecore at
http://www.magnecor.com/magnecor1/main.htm.   Call them and tell them
the lengths you need and that they are for LS-1 coils.  I bought some
of their bulk wire and ends with the though of providing them in my
catalog, but was never able to put them together correctly.  I didn't
have the right tooling, and it's really difficult to put the boot over
the wire. It doesn't cost that much more to let them make them.

Bob W.

On Sun, 3 Sep 2006 12:12:03 -0700 (PDT)
Ben Schneider <plumberben@yahoo.com> wrote:

> Gang,
>   
>      I have a bit of a problem, I am using GM coils on my  engine, and am making (or trying at least) plug wires. I ordered some  bulk MSD plug wire, and boots and terminals. But after ordering two  sets of what I thought was the right ends for the coils, have gotten to  where I have no idea what I need. Does GM have the terminals I need, is  there something I am missing? I would have thought MSD would make the  correct terminals for these coils, but cannot seem to find anything  even close from them.  
>   
>   Any help appreciated.
>   
>   Ben Schneider
>   


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/