|
George, while I use silicone on the intakes for sealing, I
do used the perforated metal gasket for the exhaust. However, Tracy (and
Lynn I believe) uses the orange (high temp) silicone and has never
reported any problem with the O2 sensor that I am aware of.
Ed
----- Original Message -----
Sent: Sunday, September 03, 2006 3:30
AM
Subject: [FlyRotary] Re: Info from the
guys with engine running, & Ed A.
Ed /David,
I was told, the other day, that silicone on the
exhaust manifold buggers up the oxygen sensor. Don't know if it was true of
not but if your running with and oxygen sensor might be something to watch out
for.
George ( down under)
----- Original Message -----
Sent: Sunday, September 03, 2006 2:20
PM
Subject: [FlyRotary] Info from the guys
with engine running, & Ed A.
Hey Ed, did you use a gasket between upper & lower intakes or
silicone sealer. Now one for the RV guys with Fred
Breeze eng. mount ( www.conversionconcepts.com)
how much eng. movement do you get under the cowel, I am setting
clearances now with a min. of .5" , but please let me know if
I'm to tight, I think thats it for now, thanks again,
David RV6A Rotary.
|