|
|
Joe,
I don't know what happed. That email
was sent a while back. I guess it was stuck in my out folder.
Thanks,
Jason
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Joe Hull
Sent: Monday, August 14, 2006 1:23
PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Stainless
321 Tubing
Todd,
That's one to
"Bookmark"! They didn't come up on the first dozen or
so pages of my google searches for Stainless bends!
I've got them in my
"Favorites" now (just in case).
Thanx,
Joe Hull
Cozy Mk-IV N31CZ (65 hrs - Rotary 13B NA)
Redmond (Seattle),
Washington
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Todd Bartrim
Sent: Monday, August 14, 2006
11:13 AM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Stainless
321 Tubing
Hi Joe;
I used .049 from Dawley Aviation and have had no problem. Tracey had
recommended them several years ago when I was looking so I assume his system
must also be .049 321SS.
http://www.dawley.net/index.html
They have a good selection and were good to deal with. Only complaint was that
I asked if they had any sensor bungs and they said they would send something.
Well the "something" they sent was 2 Swagelok tube nuts and charged
me $10 each for them. Not only are these no good whatsoever for EGT sensors, I
also happen to have a drawer here at work with a few hundred of them. I called
them about this and they apologized profusely and reimbursed my card.
Todd
|
|