Hi Chris,

I mounted mine (temporarily at the moment) on the housing around my air
cleaner.  Eventually it will be mounted in the housing where it is
exposed to the incoming air. It is called an OAT sensor. :)

Also, I used the plastic 3/32" vacuum fittings from NAPA.  They have
T's and adaptors to other sizes.  The MAP fitting I ended up with was
1/4".

Bob W.


On Mon, 7 Aug 2006 17:16:01 -0500
"the mallorys" <candtmallory@cox.net> wrote:

> Tracy,
>
> Does the temp sensor need to be installed before the throttle body, or can it be in the plenum?  If it does need to go in front, how far?  My throttle body is only a couple inches long.
>
> Thanks,
>
> Chris


--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/