Bulent,
   Forgot to note that you need to label one side of the ammeter "pitch increase"
and the other side "pitch decrease"......With a single sweep ammeter you would
not always know where you were in pitch if you forgot which way your switch
was wired ("Now was that up or down for more pitch??")......
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2




-------------- Original message from keltro@att.net (Kelly Troyer): --------------

Bulent,
   When prop is at midpoint of pitch there is essentially no load on the motor.
When you add pitch the ammeter needle swings one way (from 0 to ? amps).
When you reduce pitch you are reversing polarity of the D.C. motor and it
turns opposite direction and loads the ammeter to the opposite side........
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2




-------------- Original message from Bulent Aliev <atlasyts@bellsouth.net>: --------------


> I need a second opinion on the ammeter setup for the Ivo prop. John
> Slade is using the centering kind. I think it should be one sweep
> from 0-15 or 0-20A? Anyone else using the same setup, please let me
> know the details.
> Buly
> http://tinyurl.com/dcy36
>
>
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/