flyrotary@lancaironline.net Mailing List Archive

Ed, Yes I do. They have a hangar close by my tie down. Saw Jim last week-end at the airport. They also built a very nice RV7A, first flight was last summer. Powerplant is Lyco O-360 for future resale. One day I will install a rotary in my plane, when more time is available. This is quite an interesting forum. Been lurking for over a year now. Alain -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of Ed Anderson Sent: March 8, 2006 2:11 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: INVESTING IN A NEW PROPELLER Say, Alain I presume you may know Jim Mosur and Niel K? - they used to be at Brampton Ed Ed Anderson Rv-6A N494BW Rotary Powered Matthews, NC eanderson@carolina.rr.com ----- Original Message ----- From: "Alain Ouellet" <aouellet@icecanada.com> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net> Sent: Wednesday, March 08, 2006 11:00 AM Subject: [FlyRotary] Re: INVESTING IN A NEW PROPELLER > Yvon, > > I am based at the Brampton Flying Club in Caledon, Ontario CNC3 north of > the > Toronto airport. This is quite a busy place and a friendly bunch of > people. > > Conditions in our area were good over the last few days and was able to go > up a few times. > > We have a few Zeniths 200, 250 and 300 on the field including the > prototype > 300 still flying with a new owner. > > I have a friendly competition with another Zenith owner on plane > performance > both Lyc. O-320 but different props. > > Let me know if you come to this area. I may be going to Quebec city and > Montreal area this summer. > > Alain > > > -----Original Message----- > From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On > Behalf Of Géraldine Berger & Yvon Cournoyer > Sent: March 8, 2006 9:30 AM > To: Rotary motors in aircraft > Subject: [FlyRotary] Re: INVESTING IN A NEW PROPELLER > > > Thank you Alain, > Where are you based?. My Zenith 200 is snowed in at Sorel airport. CSY3. > Yvon. > > ----- Original Message ----- > From: "Alain Ouellet" <aouellet@icecanada.com> > To: "Rotary motors in aircraft" <flyrotary@lancaironline.net> > Sent: Tuesday, March 07, 2006 4:59 PM > Subject: [FlyRotary] Re: INVESTING IN A NEW PROPELLER > > >> Yvon >> >> They sell through their website. >> Their address is as follow: >> >> Warp Drive Inc. >> P.O. Box 781207 >> Highway 18 East, >> Ventura, Iowa 50482 >> U.S.A. >> >> My contact there is Darryl >> Phone: 800-833-9357 Canada & USA >> >> My prop is a 3 blades 72 inches HP Warp Drive. >> Its installed on Zenith CH300, O-320 150 E2D Lycoming. >> I have good results with it. >> Better performance compared with another Zenith with same engine but >> using a >> Sensenich propeller. >> >> Just sent my prop for refurbishing and to add nickel leading edges. >> >> Regards, >> >> Alain Ouellet >> Zenith CH300 O-320 E2D >> C-FJDG >> >> >> >> -----Original Message----- >> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On >> Behalf Of Géraldine Berger & Yvon Cournoyer >> Sent: March 7, 2006 4:40 PM >> To: Rotary motors in aircraft >> Subject: [FlyRotary] INVESTING IN A NEW PROPELLER >> >> >> I am getting ready to invest in a new Warp Drive 3 blade 72 inch >> propeller sold by Hoverhawk Corporation at www.warpdriveprops.com. >> However their website does not list a business address, only phone >> numbers. >> Has anyone done business with them recently? >> Yvon >> >> >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ >> >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ >> > > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ > -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/