X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imf23aec.mail.bellsouth.net ([205.152.59.71] verified) by logan.com (CommuniGate Pro SMTP 5.0.8) with ESMTP id 971829 for flyrotary@lancaironline.net; Mon, 06 Feb 2006 03:20:00 -0500 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.71; envelope-from=bobperk@bellsouth.net Received: from ibm64aec.bellsouth.net ([70.149.150.19]) by imf20aec.mail.bellsouth.net with ESMTP id <20060206081845.UQFC5619.imf20aec.mail.bellsouth.net@ibm64aec.bellsouth.net> for ; Mon, 6 Feb 2006 03:18:45 -0500 Received: from HpPavilion310n ([70.149.150.19]) by ibm64aec.bellsouth.net with ESMTP id <20060206081845.YDHT28426.ibm64aec.bellsouth.net@HpPavilion310n> for ; Mon, 6 Feb 2006 03:18:45 -0500 From: "Bob Perkinson" To: "Rotary motors in aircraft" Subject: RE: [FlyRotary] Re: Hose size for the coolant Date: Mon, 6 Feb 2006 02:19:26 -0600 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Ed, How did you make the transition peaces between the cowling and the radiator cores, what material did you use. I know you told me when we were down at Charles but I have slept a lot since then, Bob Perkinson Hendersonville, TN. RV9 N658RP Reserved If nothing changes Nothing changes -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of Ed Anderson Sent: Sunday, February 05, 2006 4:26 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: Hose size for the coolant More than enough, Dennis. I use AN-16 stainless steel braided line, but if doing it over would simply use good quality radiator hose and replace them ever 2-3 years. Ed ----- Original Message ----- From: "Dennis Haverlah" To: "Rotary motors in aircraft" Sent: Sunday, February 05, 2006 5:12 PM Subject: [FlyRotary] Hose size for the coolant > Ed and others flying > > What size coolant lines are adequate? I may go with AN or socketless type > hose and am considering 1 inch ID for the coolant and 1/2 inch for the oil > lines. > > Thanks, > Dennis H > RV 7A/Renesis > > > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ > -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/