|
Message
Good news Rusty,
off-topic, but you were battling it for some
time:
I don't know wether you sent this original message with
gmail or bellsucks - just for your leisure thoughts ( when you get them offthe
single rotor....):
I received George's reply to your email at 18:10 local -
I received your original email at 19:03
local.......
Thomas J.
----- Original Message -----
Sent: Sunday, February 05, 2006 5:49
PM
Subject: [FlyRotary] Re: Single rotor
smooth as silk now
Rusty,
Really good news, you might get Tracy to supply
some alternative rubber isolators - probably harder ones? but I'm
guessing!
George ( down under)
Greetings,
Well, there's certainly
nothing wrong with the balance of the single rotor parts, because it's
smooooooth as can be now that the redrive and prop are gone. Below
1800 or so, there's some shake from the lack of flywheel weight, but it runs
down to 1000 rpm or so without being too bad. Above 2000, up to 6000
rpm, it's true rotary smooth. I guess I just need a redrive
with a suitable dampener now, but that's not going to be any sort of
priority until the RV-8 is done. Unfortunately, that kit was delayed,
and I won't even get it until the first of March.
Cheers,
Rusty (you may now return
to Evan's bashing)
|