|
Message
What size coolant lines are adequate? I may go with AN or
socketless
type hose and am considering 1 inch ID for the coolant and 1/2
inch for
the oil lines.
Hi
Dennis,
Both of those sizes will
work. I used AN-12 (theoretically 3/4" ID) with two evap cores in
series (worst case), and it was no problem. 1/2" is a bit smaller than
most people run on oil, but it's bigger than the hole in the fitting on the
front cover. If you've got a really long run for the hose (remotely
mounted cooler), then I'd go up a size at least.
Cheers,
Rusty
|