Received-SPF: pass
 receiver=logan.com; client-ip=24.25.9.100; envelope-from=eanderson@carolina.rr.com
Message-ID: <000301c62054$d1e475b0$2402a8c0@edward2>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-950749@logan.com>
Subject: Re: [FlyRotary] Re: Fw: Lead Solvent or Cleaner
Date: Mon, 23 Jan 2006 14:40:09 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Boy, that might do the job, Ok.  I remember mother used to make Lye soap 
with Hog fat - that would take paint off cars, skin off people, etc.  Just 
might do the job.  Use to be able to get it a plumbing stores - but, doubt 
they carry it anymore - too corrosive.

Ed
----- Original Message ----- 
From: "Mark R Steitle" <mark.steitle@austin.utexas.edu>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, January 23, 2006 2:24 PM
Subject: [FlyRotary] Re: Fw: Lead Solvent or Cleaner


Ed,
I've been trying to remember what my dad told me they used to use to
clean their spark plugs.  Finally, I remembered... it was lye.  I never
tried it myself, but it could be worth a try.  Don't know where to go to
buy it though.

Mark s.

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of rijakits
Sent: Friday, January 20, 2006 7:29 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Fw: Lead Solvent or Cleaner

Hey Ed,

I like the Coke idea!!
There is a list out there with "1001 uses for Coke!", the last is " You
also
can trink it!!" :))

Googling around on "Acetone lead remover", I found this:

_______________________________________________________________

Lead Removal

For really stubborn lead removal try a 50/50 mix of  3% Hydrogen
Peroxide
(the common drug store variety) and white vinegar.  Plug the bore, fill
it
up using a dropper or syringe and let it stand for 5-10 minutes.  (Do
not
let it stand for too long.) You may get some foaming so protect the
barrel's
external finish as this solution is not kind to bluing--so take
appropriate
precautions. Drain and wipe out the black muck that used to be lead and
then
immediately clean well with bore cleaner.

Thanks to Joe Sledge for this recipe.

Pure turpentine has reportedly also been used as a lead remover.

_______________________________________________________________

You will find this in http://www.frfrogspad.com/homemade.htm#top


Also, as Acetone is the prime solvent in lots of paint
removers/cleaners/etc. you might want to experiment with Acetone.

I think someone in our hangar mentioned a mix of Acetone and Hydrogen
Peroxide, but I am not sure wether this possible/makes any sense/is
hear-say/or what - don't blow up your new hangar trying
plug-cleaner-witchcraft!!

Thomas J.


PS: I apolgize if this is/was old news - I am about 80 messages behind!


----- Original Message ----- 
From: "Ernest Christley" <echristley@nc.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, January 19, 2006 1:49 PM
Subject: [FlyRotary] Re: Fw: Lead Solvent or Cleaner


> Ed Anderson wrote:
>
> > I suspect that most of these products may be cleaners rather than
> > solvents despite what they are called.  Anyone really know?
>
> I have no idea about the cleaners vs solvents (how does it clean it if
> it doesn't dissolve it?), but I've been thinking.  The electrodes
should
> be made of a fairly corrosive resistent material.  Couldn't they
> withstand a short bath in a mild acid...maybe a little vinegar or a
warm
> Coke?  The burnt lead should react quickly.
>
> -- 
>          ,|"|"|,                                    |
> ----===<{{(oQo)}}>===----        Dyke Delta         |
>         o|  d  |o          www.ernest.isa-geek.org  |
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/